This is the list of error codes for the D30. The list source is a post to Rob Galbraith's ; the poster was Chuck Westfall, Director, Technical Information Dept. Camera Division/Canon U.S.A., Inc.

To download a copy of this list in Word 2000 format, right click here.

09 SYSTEM

Description: This error occurs when the EOS D30's self-checking system processing time has exceeded the specified limit. This error can occur when several switches are pressed at the same time.

Action: Because this error is caused by abnormal operation, try releasing the error by turning the main power switch OFF and then back ON. If this does not solve the problem, have the EOS D30 examined by a qualified service technician.

22 CF DRIVER

Description: This error occurs when image data cannot be written to the CF card. This error can occur for several reasons:

• The CF card is not fully seated in the camera
• The D30 does not detect a card-ready signal within a specified time limit
• The CF card is not usable because it has been corrupted or physically damaged
• The camera's battery level is insufficient to completely write the file to the CF card

Action: Use the DC Coupler or recharge the battery first. If the error continues with sufficient power available to the camera, check that the CF card is properly inserted. If that's not the problem, then try replacing the CF card. If that does not solve the problem, have the EOS D30 and one of the CF cards that is causing the problem examined by a qualified service technician.